English |
Model |
HYU-SH-SA12001 |
|
Power Supply |
|
| Bus voltage |
21~30VDC, via the KNX bus |
| Bus current |
< 6.5mA/24V, < 5.5mA/30V |
| Bus consumption |
< 165mW |
| Charging current |
< 20mA |
|
Output |
|
| Un rated voltage |
250VAC (50/60Hz) |
| In rated current |
16A |
| In rush current |
480A/2ms |
|
Output life expectancy |
|
| Mechanical endurance |
>10⁶ |
| Electrical endurance (Resistive load) |
>10⁵ |
|
Connections |
|
| KNX |
Bus connection terminal (0.8mmΦ) |
| Load output connection terminal |
Screw terminal |
| Cross section |
0.2—6.0mm2 |
|
Operation and display |
|
| Programming LED and button |
For assignment of the physical address |
| Green LED flashing |
Indicate the application layer running normally |
| Indication of the contact position |
Close means the output is on Open means the output is off |
|
Environment |
|
| Protection |
IP20 |
| Safety class |
II |
| Temperature |
Operation: -5°C~+45°C |
|
Storage: -25°C~+55°C |
|
|
Transport: -25°C~+70°C |
|
| Humidity |
< 93%, except dewing |
| Modular DIN-Rail Component |
35mm Din rail, modular installation |
| Dimension |
216×90×64mm |
| Weight |
0.60kg |
KNX Switch Actuator 12-fold, 16A HYU-SH-SA12001
- Manual operation available
- Time function: on/off delay
- Staircase function with the warning and adjustable staircase lighting time
- Scene, preset control: 8bit/1bit
- Logic operation: AND, OR, XOR, gate function
- Status response
- Forced operation and safety function
- Threshold function setup
- Control of electric thermal valve function
- Selection of preferred status after bus voltage failure and recovery
- Current and Power measurement
- Report total current and total power of device
- Monitoring channel current and total current
- Switching counter
- Operation hours counter
- Inversion of the outputs
- KNX Data Secure
Recommended
Related products
KNX Switch Actuator 12-fold, 1...