Model |
HYU-NE-SW-I4SFP001 |
Interface Characteristics |
|
Fixed Port |
4*10/100Base T PoE ports (Data /Power)
1*155M uplink SC port (Data) 2 ground of V+, V redundant DC power interface (5P Phoenix terminal) |
Ethernet Port |
10/100Base-TX auto-sensing, full/half duplex MDI/MDI-X self-adaption |
Twisted Pair Transmission |
10BASE T: Cat3,4,5 UTP (≤100 meter)
100BASE TX: Cat5e or later UTP (≤100 meter) |
Fiber Port |
The default optical module is single-mode dual-fiber 20km, SC interface; Multi-mode dual fiber and single-mode single fiber see product selection table |
Optical Cable |
Multimode: 850nm 0 ~ 550M, single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM |
Chip Parameter |
|
Network Protocol |
IEEE802.3 10BASE T; IEEE802.3i 10Base T;
IEEE802.3u 100Base TX; IEEE802.3u 100Base FX; IEEE802.3x |
Forwarding Mode |
Store and Forward (Full Wire Speed) |
Switching Capacity |
1.6Gbps (Non-blocking) |
Forwarding Rate@64byte |
0.744Mpps |
MAC |
1K |
Buffer Memory |
768K |
Jumbo Frames |
9.2K |
LED Indicator |
Power: PWR (green), Network: Link, (yellow); PoE: PoE (green), fiber port: 5 (green) |
PoE & Power |
|
PoE Port |
5-Port 10/100M Industrial POE Fiber Switch |
Power Supply Pin |
Default 1/2 (+), 3/6 (–), optional 4/5 (+), 7/8 (–) |
Max Power Per Port |
30W; IEEE802.3af/at |
Total PWR / Input Voltage |
120W/48VDC |
Power Consumption |
Standby: <4W, Full Load: <120W |
Working Voltage |
48-57VDC; 5P industrial phoenix terminal, anti-reverse protection. |
Power Supply |
No, optional 48V/60W or 48V/120W industrial power supply |
Physical Parameter |
|
Operation TEMP/Humidity |
-40 ~ +80°C; 5% ~ 90% RH Non condensing |
Storage TEMP / Humidity |
-40 ~ +85°C; 5% ~ 95% RH Non condensing |
Dimension |
119*100*30mm |
Net /Gross Weight |
<0.5kg / <0.7kg |
Installation |
Desktop, 35mm DIN rail |
Certification |
|
Lightning Protection / Protection Level |
Lightning protection: 6KV 8/20us; Protection level: IP40 IEC61000-4-2(ESD): ±8kV contact discharge±15kV air discharge IEC61000-4-3(RS): 10V/m (80 ~ 1000MHz) IEC61000-4-4(EFT): power cable: ±4kV; data cable: ±2kV IEC61000-4-5(Surge): power cable:CM±4kV/DM±2kV; data cable: ±4kV IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz) IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s IEC61000-4-9(pulsed magnet field):1000A/m IEC61000-4-10(damped oscillation):30A/m 1MHz IEC61000-4-12/18(shockwave):CM 2.5kV, DM 1kV IEC61000-4-16(common mode transmission):30V; 300V,1s FCC Part 15/CISPR22(EN55022): Class A IEC61000-6-2(Common Industrial Standard) |
Mechanical Properties |
IEC60068-2-6 (anti vibration), IEC60068-2-27 (anti shock), IEC60068-2-32 (free fall) |
Certification |
CCC, CE mark, commercial; CE/LVD EN60950; FCC Part 15 Class B; RoHS |