English 
|
Model |
HYU-NE-SW-M8PFM001 |
|
Interface |
8*10/100Base-TX PoE ports (Data/Power)
2*10/100/1000Base-T uplink RJ45 ports (Data) 2*1000M uplink SFP fiber slot ports (Data) |
| PoE Port |
Port 1 – 8 can support IEEE802.3af PoE standard |
|
Network Protocol |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;
IEEE802.3u 100Base-TX/FX; IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X IEEE802.3x |
| PoE Standard |
IEEE802.3af/at |
|
Ethernet Port Feature |
Port 1-8 10/100Base-T(X), Auto-sensing, Port 9-10: 10/100/1000Base-T, auto- sensing, full/half duplex MDI/MDI-X self-adaption |
| Fiber Port Feature |
Gigabit SFP fiber interface (Fiber module is not included, need to order separately, module options include single/multi mode, single/dual fiber, LC) |
|
Forwarding Mode |
Store and Forward (Full Wire Speed) |
| Switching Capacity |
64Gbps (Non-blocking) |
|
Forwarding Rate@64byte |
4.17Mpps |
| MAC |
16K |
|
Buffer Memory |
4M |
| Twisted Pair Transmission |
10BASE-T: Cat3,4,5 UTP (≤100 meter) 100BASE-TX: Cat5 or later UTP (≤100 meter) 1000BASE-T: Cat5e or later UTP (≤100 meter) |
|
Optical Fiber Cable |
Multi Mode: 850nm 0-550M; Single Mode: 1310nm 0-40KM,1550nm 0-120KM. |
| Power Supply Pin |
Default: 1/2(+),3/6(-); Optional: 4/5(+),7/8(-) |
|
Max / Average Power Per Port |
30W/15.4W |
| Total PWR / Input Voltage |
130W (AC100-240V) |
|
Power Consumption |
Standby: <6W
Full load: <130W |
| LED Indicator |
Power indicator: PWR (green); data indicator: Link, Link/Act (yellow), PoE indicator: PoE (green); speed indicator: speed (green) |
|
Power Supply |
Built in power supply, AC100~240V 50-60Hz 2.3A |
| Operation TEMP / Humidity |
-20 ~ +55°C;5%~90% RH Non condensing |
|
Storage TEMP / Humidity |
-40 ~ +75°C;5%~95% RH Non condensing |
| Dimension |
270*181*44.5mm |
|
Net /Gross Weight |
<2.8kg /<3.5kg |
| Installation Method |
Desktop type, wall mounted, 19 inch 1U cabinet installation |
|
Port lightning protection / protection level |
Port lightning protection: 4KV 8/20us
Protection level: IP30 |
| Certification |
CCC; CE mark; commercial; CE/LVD EN60950; FCC Part 15 Class b; RoHS |
|
 Marged Series Feature |
|
|
Interface |
IEEE802.3X (Full duplex)
Broadcast storm control based on port speed Speed limit of the message flow in the access port. The minimum particle size is 64Kbps |
| PoE Management |
Distribution for PoE output power of each port PoE working status Delay start of power supply Scheduling of PoE operation and time |
|
VLAN |
4K VLAN based on port, IEEE802.1q
VLAN based on protocol QinQ configuration |
| Port Aggregation |
LACP Manual aggregation Support the largest 13 aggregation groups, each aggregation group supports 8 ports |
|
Spanning Tree |
STP(IEEE802.1d)
RSTP(IEEE802.1w) MSTP(IEEE802.1s) |
| Multicast |
IGMP Snooping v1/v2/v3, Max 64 multicast groups Fast log out MLD Snooping v1/v2 Multicast VLAN |
|
Mirroring |
Bidirectional data mirroring based on port |
| QoS |
Diff-Serv QoS 8*Output queues of each port 802.1p/DSCP priority mapping Queue Scheduling Algorithm (SP, WRR, SP+WRR) Priority Mark/Remark |
|
ACL |
L2-L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range and VLAN etc. Port-based Issuing ACL |
| Security |
Port isolation Broadcast storm control Port + MAC binding, IP + MAC + port binding |
|
DHCP |
DHCP Relay
DHCP Client DHCP Snooping |
| Management and Maintenance |
Web Management (HTTPS) SNMP V1/V2C/V3 One-key recovery NTP Login Record |
10-Port Gigabit Uplink Managed PoE Switch HYU-NE-SW-M8PFM001
- 8*10/100M RJ45 port (Data/Power)
2*10/100/1000M Combo RJ45/SFP (Data) - 1-8 ports compatible with IEEE 802.3af/at
- Standard power is 15.4W/port, Maximum power: 30W/port
- PoE default: 1, 2(+)/3, 6(-) , alternative: 4, 5(+)/7, 8(-)
- Bandwidth:64Gbps
- MACtable:16K
- Support WEB management, VLAN, QoS
- Built-in AC power adapter
- Compatible with standard 1U rack
- With cooling fan.
Recommended
Related products
10-Port Gigabit Uplink Managed...