English |
Model |
HYU-FA-CFP001-4 |
|
|
                 Power Supply |
||
|
Operating voltage |
AC (85 ~ 260) V / 50/60 Hz | |
| Mains supply current limit |
720 mA @ AC 230 V |
|
|
Mains supply fuse |
4 A / AC 250 V slow blow (20 mm) | |
| Mains supply fault threshold voltage |
≤ AC 60 V |
|
|
Power supply |
2.2 A @ DC 28.5 V | |
| Quiescent current (Imin) |
45 mA |
|
|
Maximum continuous output current (Ia, max) |
0.425 A | |
| Maximum short-duration output current (Ib, max) |
1.3 A |
|
|
Standby battery maximum capacity (2 × DC 12 V) |
7.2 Ah | |
| Maximum battery current draw |
1.5 A @ maximum operating temperature |
|
|
Battery fuse |
6 A resettable (electronic fuse) | |
| Battery fault threshold voltage |
< DC 20 V |
|
|
Battery fault threshold internal resistance (RI, max) |
0.5 Ω | |
| Quiescent current |
45 m A @ DC 28 V |
|
|
  Detection Zones |
||
|
Detection zone circuits |
4 | |
| Number of connected devices per detection zone circuit |
32 |
|
|
Detector zone quiescent current |
5mA | |
| Detector zone alarm current |
80mA |
|
|
Detector zone wiring characteristics (max) |
40 Ω / 0.47 μF | |
| Detection zone end-of-line capacitor |
10 μF / DC 50 V |
|
|
Manual call point resistor value |
(470 ~ 689) Ω |
|
|
  Alarm Zones |
||
|
Alarm zone outputs |
1 | |
| Alarm zone current |
700mA |
|
|
Alarm zone end-of-line resistor |
100 kΩ | |
| Alarm zone monitoring |
Open- and short-circuit |
|
|
Alarm zone voltage (max) |
DC 27.5 V | |
| Alarm zone fuse |
1.1 A resettable (electronic fuse) |
|
|
  Ancillary Outputs |
||
|
Number of programmable output relays |
2 | |
| Ancillary fire C/O relay |
2 × (1.0 A @ DC 30 V / 1 A @ AC 240 V) |
|
|
Ancillary fault N/C relay |
1.0 A @ DC 30 V / 1 A @ AC 240 V | |
| Auxiliary supply |
DC (12.0 ~ 28.2) V @ 200 mA |
|
|
Auxiliary supply at (Ib, min) |
DC (19.5 ~ 29.0) V @ 0 mA |
|
|
  Ancillary Inputs |
||
|
Evacuation start / stop |
Non-latching, voltage-free | |
| Day / Night mode |
Non-latching, voltage-free |
|
|
Remote reset |
Non-latching, voltage-free |
|
|
  Miscellaneous |
||
|
Terminal wiring |
(0.4 ~ 2.5) mm2 | |
| Operating temperature |
(0 ~ +50) °C |
|
|
Operating humidity |
(0 ~ 95) % RH, non-condensing | |
| Storage temperature |
(-25 ~ +80) °C |
|
|
Storage humidity |
(0 ~ 98) % RH, non-condensing | |
| Dimensions (h × w × d) |
(402 × 337 × 99) mm |
|
|
Weight (excluding batteries) |
4.0 kg |
|
Non-addressable 4 Zone Fire Alarm Control and Indicating Equipment HYU-FA-CFP001-4
- 4 detection zones
- Supports up to 32 non-addressable devices per alarm zone circuit
- Capacitor end-of-line device
- Configurable timer to delay output activation (up to 10 min)
- 3 Access Levels
- Day/night mode configurable
- 3 voltage-free inputs for remote reset, evacuation start/stop, and Day/Night mode
- Supports up to 7 Repeater Panels
Recommended
Related products
Non-addressable 4 Zone Fire Al...